#include <wx/graphics.h>

Inheritance diagram for wxGraphicsPath:

Detailed Description

A wxGraphicsPath is a native representation of a geometric path.

The contents are specific and private to the respective renderer. Instances are reference counted and can therefore be assigned as usual. The only way to get a valid instance is by using wxGraphicsContext::CreatePath() or wxGraphicsRenderer::CreatePath().

Library: wxCore

Category: Graphics Device Interface (GDI)

Public Member Functions
virtual void	AddArcToPoint (wxDouble x1, wxDouble y1, wxDouble x2, wxDouble y2, wxDouble r)
	Appends a an arc to two tangents connecting (current) to (x1,y1) and (x1,y1) to (x2,y2), also a straight line from (current) to (x1,y1). More...

virtual void	AddCircle (wxDouble x, wxDouble y, wxDouble r)
	Appends a circle around (x,y) with radius r as a new closed subpath. More...

virtual void	AddCurveToPoint (wxDouble cx1, wxDouble cy1, wxDouble cx2, wxDouble cy2, wxDouble x, wxDouble y)
	Adds a cubic bezier curve from the current point, using two control points and an end point. More...

void	AddCurveToPoint (const wxPoint2DDouble &c1, const wxPoint2DDouble &c2, const wxPoint2DDouble &e)
	Adds a cubic bezier curve from the current point, using two control points and an end point. More...

virtual void	AddEllipse (wxDouble x, wxDouble y, wxDouble w, wxDouble h)
	Appends an ellipse fitting into the passed in rectangle. More...

virtual void	AddLineToPoint (wxDouble x, wxDouble y)
	Adds a straight line from the current point to (x,y). More...

void	AddLineToPoint (const wxPoint2DDouble &p)
	Adds a straight line from the current point to p. More...

virtual void	AddPath (const wxGraphicsPath &path)
	Adds another path. More...

virtual void	AddQuadCurveToPoint (wxDouble cx, wxDouble cy, wxDouble x, wxDouble y)
	Adds a quadratic bezier curve from the current point, using a control point and an end point. More...

virtual void	AddRectangle (wxDouble x, wxDouble y, wxDouble w, wxDouble h)
	Appends a rectangle as a new closed subpath. More...

virtual void	AddRoundedRectangle (wxDouble x, wxDouble y, wxDouble w, wxDouble h, wxDouble radius)
	Appends a rounded rectangle as a new closed subpath. More...

virtual void	CloseSubpath ()
	Closes the current sub-path. More...

bool	Contains (const wxPoint2DDouble &c, wxPolygonFillMode fillStyle=wxODDEVEN_RULE) const

virtual bool	Contains (wxDouble x, wxDouble y, wxPolygonFillMode fillStyle=wxODDEVEN_RULE) const

wxRect2DDouble	GetBox () const
	Gets the bounding box enclosing all points (possibly including control points). More...

virtual void	GetBox (wxDouble x, wxDouble y, wxDouble w, wxDouble h) const
	Gets the bounding box enclosing all points (possibly including control points). More...

virtual void	GetCurrentPoint (wxDouble x, wxDouble y) const
	Gets the last point of the current path, (0,0) if not yet set. More...

wxPoint2DDouble	GetCurrentPoint () const
	Gets the last point of the current path, (0,0) if not yet set. More...

virtual void *	GetNativePath () const
	Returns the native path (CGPathRef for Core Graphics, Path pointer for GDIPlus and a cairo_path_t pointer for cairo). More...

virtual void	MoveToPoint (wxDouble x, wxDouble y)
	Begins a new subpath at (x,y). More...

void	MoveToPoint (const wxPoint2DDouble &p)
	Begins a new subpath at p. More...

virtual void	Transform (const wxGraphicsMatrix &matrix)
	Transforms each point of this path by the matrix. More...

virtual void	UnGetNativePath (void *p) const
	Gives back the native path returned by GetNativePath() because there might be some deallocations necessary (e.g. More...


virtual void	AddArc (wxDouble x, wxDouble y, wxDouble r, wxDouble startAngle, wxDouble endAngle, bool clockwise)
	Adds an arc of a circle. More...

void	AddArc (const wxPoint2DDouble &c, wxDouble r, wxDouble startAngle, wxDouble endAngle, bool clockwise)
	Adds an arc of a circle. More...

Public Member Functions inherited from wxGraphicsObject
wxGraphicsRenderer *	GetRenderer () const
	Returns the renderer that was used to create this instance, or NULL if it has not been initialized yet. More...

bool	IsNull () const

Public Member Functions inherited from wxObject
	wxObject ()
	Default ctor; initializes to NULL the internal reference data. More...

	wxObject (const wxObject &other)
	Copy ctor. More...

virtual	~wxObject ()
	Destructor. More...

virtual wxClassInfo *	GetClassInfo () const
	This virtual function is redefined for every class that requires run-time type information, when using the wxDECLARE_CLASS macro (or similar). More...

wxObjectRefData *	GetRefData () const
	Returns the wxObject::m_refData pointer, i.e. the data referenced by this object. More...

bool	IsKindOf (const wxClassInfo *info) const
	Determines whether this class is a subclass of (or the same class as) the given class. More...

bool	IsSameAs (const wxObject &obj) const
	Returns true if this object has the same data pointer as obj. More...

void	Ref (const wxObject &clone)
	Makes this object refer to the data in clone. More...

void	SetRefData (wxObjectRefData *data)
	Sets the wxObject::m_refData pointer. More...

void	UnRef ()
	Decrements the reference count in the associated data, and if it is zero, deletes the data. More...

void	UnShare ()
	This is the same of AllocExclusive() but this method is public. More...

void	operator delete (void *buf)
	The delete operator is defined for debugging versions of the library only, when the identifier `WXDEBUG` is defined. More...

void *	operator new (size_t size, const wxString &filename=NULL, int lineNum=0)
	The new operator is defined for debugging versions of the library only, when the identifier `WXDEBUG` is defined. More...

Additional Inherited Members
Protected Member Functions inherited from wxObject
void	AllocExclusive ()
	Ensure that this object's data is not shared with any other object. More...

virtual wxObjectRefData *	CreateRefData () const
	Creates a new instance of the wxObjectRefData-derived class specific to this object and returns it. More...

virtual wxObjectRefData *	CloneRefData (const wxObjectRefData *data) const
	Creates a new instance of the wxObjectRefData-derived class specific to this object and initializes it copying data. More...

Protected Attributes inherited from wxObject
wxObjectRefData *	m_refData
	Pointer to an object which is the object's reference-counted data. More...

Member Function Documentation

virtual void wxGraphicsPath::AddArc	(	wxDouble	x,
		wxDouble	y,
		wxDouble	r,
		wxDouble	startAngle,
		wxDouble	endAngle,
		bool	clockwise
	)

virtual

Adds an arc of a circle.

The circle is defined by the coordinates of its centre (x, y) or c and its radius r. The arc goes from the starting angle startAngle to endAngle either clockwise or counter-clockwise depending on the value of clockwise argument.

The angles are measured in radians but, contrary to the usual mathematical convention, are always clockwise from the horizontal axis.

void wxGraphicsPath::AddArc	(	const wxPoint2DDouble &	c,
		wxDouble	r,
		wxDouble	startAngle,
		wxDouble	endAngle,
		bool	clockwise
	)

Adds an arc of a circle.

The circle is defined by the coordinates of its centre (x, y) or c and its radius r. The arc goes from the starting angle startAngle to endAngle either clockwise or counter-clockwise depending on the value of clockwise argument.

The angles are measured in radians but, contrary to the usual mathematical convention, are always clockwise from the horizontal axis.

virtual void wxGraphicsPath::AddArcToPoint	(	wxDouble	x1,
		wxDouble	y1,
		wxDouble	x2,
		wxDouble	y2,
		wxDouble	r
	)

virtual

Appends a an arc to two tangents connecting (current) to (x1,y1) and (x1,y1) to (x2,y2), also a straight line from (current) to (x1,y1).

virtual void wxGraphicsPath::AddCircle	(	wxDouble	x,
		wxDouble	y,
		wxDouble	r
	)

virtual

Appends a circle around (x,y) with radius r as a new closed subpath.

virtual void wxGraphicsPath::AddCurveToPoint	(	wxDouble	cx1,
		wxDouble	cy1,
		wxDouble	cx2,
		wxDouble	cy2,
		wxDouble	x,
		wxDouble	y
	)

virtual

Adds a cubic bezier curve from the current point, using two control points and an end point.

void wxGraphicsPath::AddCurveToPoint	(	const wxPoint2DDouble &	c1,
		const wxPoint2DDouble &	c2,
		const wxPoint2DDouble &	e
	)

Adds a cubic bezier curve from the current point, using two control points and an end point.

virtual void wxGraphicsPath::AddEllipse	(	wxDouble	x,
		wxDouble	y,
		wxDouble	w,
		wxDouble	h
	)

virtual

Appends an ellipse fitting into the passed in rectangle.

virtual void wxGraphicsPath::AddLineToPoint	(	wxDouble	x,
		wxDouble	y
	)

virtual

Adds a straight line from the current point to (x,y).

void wxGraphicsPath::AddLineToPoint ( const wxPoint2DDouble & p )

Adds a straight line from the current point to p.

virtual void wxGraphicsPath::AddPath ( const wxGraphicsPath & path )

virtual

Adds another path.

virtual void wxGraphicsPath::AddQuadCurveToPoint	(	wxDouble	cx,
		wxDouble	cy,
		wxDouble	x,
		wxDouble	y
	)

virtual

Adds a quadratic bezier curve from the current point, using a control point and an end point.

virtual void wxGraphicsPath::AddRectangle	(	wxDouble	x,
		wxDouble	y,
		wxDouble	w,
		wxDouble	h
	)

virtual

Appends a rectangle as a new closed subpath.

virtual void wxGraphicsPath::AddRoundedRectangle	(	wxDouble	x,
		wxDouble	y,
		wxDouble	w,
		wxDouble	h,
		wxDouble	radius
	)

virtual

Appends a rounded rectangle as a new closed subpath.

virtual void wxGraphicsPath::CloseSubpath ( )

virtual

Closes the current sub-path.

bool wxGraphicsPath::Contains	(	const wxPoint2DDouble &	c,
		wxPolygonFillMode	fillStyle = `wxODDEVEN_RULE`
	)		const

Returns: true if the point is within the path.

virtual bool wxGraphicsPath::Contains	(	wxDouble	x,
		wxDouble	y,
		wxPolygonFillMode	fillStyle = `wxODDEVEN_RULE`
	)		const

virtual

Returns: true if the point is within the path.

wxRect2DDouble wxGraphicsPath::GetBox ( ) const

Gets the bounding box enclosing all points (possibly including control points).

virtual void wxGraphicsPath::GetBox	(	wxDouble *	x,
		wxDouble *	y,
		wxDouble *	w,
		wxDouble *	h
	)		const

virtual

Gets the bounding box enclosing all points (possibly including control points).

virtual void wxGraphicsPath::GetCurrentPoint	(	wxDouble *	x,
		wxDouble *	y
	)		const

virtual

Gets the last point of the current path, (0,0) if not yet set.

wxPoint2DDouble wxGraphicsPath::GetCurrentPoint ( ) const

Gets the last point of the current path, (0,0) if not yet set.

virtual void* wxGraphicsPath::GetNativePath ( ) const

virtual

Returns the native path (CGPathRef for Core Graphics, Path pointer for GDIPlus and a cairo_path_t pointer for cairo).

virtual void wxGraphicsPath::MoveToPoint	(	wxDouble	x,
		wxDouble	y
	)

virtual

Begins a new subpath at (x,y).

void wxGraphicsPath::MoveToPoint ( const wxPoint2DDouble & p )

Begins a new subpath at p.

virtual void wxGraphicsPath::Transform ( const wxGraphicsMatrix & matrix )

virtual

Transforms each point of this path by the matrix.

virtual void wxGraphicsPath::UnGetNativePath ( void * p ) const

virtual

Gives back the native path returned by GetNativePath() because there might be some deallocations necessary (e.g.

on cairo the native path returned by GetNativePath() is newly allocated each time).

Detailed Description

Public Member Functions

Additional Inherited Members

Member Function Documentation